Home > Observatories & Automation > Computers >

PrimaLuceLab EAGLE6 S, Computer for Telescopes and Astrophotography

Starting Price: $1,795.00
Price as Configured: $1,795.00

Brand: PrimaLuceLab / SKU: PLL-EAGLE6S

EAGLE6 S is the more powerful version of the EAGLE6. With its i3 processor, 8 GB of fast RAM, a larger SSD (256 GB), and the addition of Thunderbolt interface (providing even higher-speed connectivity, up to 40 Gbps, for devices like high-speed storage if extra space is needed) to USB-C ports, EAGLE6 S delivers greater performance while maintaining low power consumption!

All in a lightweight, compact all-in-one design with PLUS aluminum housing to be installed on your telescope and that comes with all of the advanced features of the EAGLE6 like WiFi 6E wireless connection, GPS sensor with high gain antenna, EYE sensor to monitor sky darkness, DARK mode to disable LED lights, GHOST mode to replace USB cables of PLL devices with wireless connection, Inclinometer and Motion Detector sensors, remote control with Lights-out Management, Observatory Actions with CTRL-IN and CTRL-OUT ports!

Recommended Add-ons and Accessories

Product	Price	Quantity
PLL-1000057 - PrimaLuceLab 12.8V AC Adapter for EAGLE - 14A About This Product If you want to power a PrimaLuceLab EAGLE (that can power all other connected devices) and use it from a fixed station such as an observatory, you can connect it to an AC adapter power supply. This 12.8V / 14A power supply (compatible with 100 to 240V) comes a 2.5-meter extension cable and EU (Schuko), UK and USA plugs. When used with the included extension, the power unit cable is 5 meters long. The 14A version has a slightly higher voltage (12.8V instead of the standard 12V) because, when you use the EAGLE to power multiple accessories with high power consumption, you can see a small drop that, this way, will always be just above 12V.	$195.00 each
PLL-1000028 - PrimaLuceLab 12V Power Cable with Banana Plugs for Eagle - 250cm About This Product In order to power the PrimaLuceLab Eagle (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to Eagle with this 12V power cord. On the one side it has the Eagle screw connector, on the other one it has banana connectors.	$45.00 each
PLL-1000029 - PrimaLuceLab 12V Power Cable with Cigarette Plug for Eagle - 250cm About This Product 12V power cable with cigarette plug for Eagle - 250cm	$49.00 each
PLL-10000AND - PrimaLuceLab Eagle Power Cable with Anderson Connector with 16A Fuse- 250cm About This Product In order to power the PrimaLuceLab EAGLE (which in turn can power all other connected devices) you can use a battery or an A/C power supply. If you already have a battery of sufficient capacity, you can connect to EAGLE with this 12V power cord. On the one side it has the EAGLE screw connector, on the other one it has an Anderson connector with 16A fuse to avoid polarity inversion.	$59.00 each
PLL-ECCO2 - PrimaLuceLab ECCO2, Environmental Computerized Controller for EAGLE About This Product ECCO is the Environmental Computerized COntroller for EAGLE that automates the management of dew heaters during long exposure astrophotography. By adding the ECCO module to your EAGLE, it will automatically and continuously monitor the temperature, humidity of the air around your telescope and the temperature of your lenses by calculating the dew point (the temperature below which dew condenses). This way it will vary the heating of dew heaters connected to the appropriate ports avoiding dew to condensate on your optics. This is automatic with an easy to use device. Just connect it to the EAGLE's USB port. For this reason we decided to call it ECCO. In Italian, it means "There you go"!	$195.00 each