Optec FocusLynx QuickSync for Takahashi MEF

Starting Price: $325.00
Price as Configured: $325.00
Brand: Optec / SKU: OP-19765

The #19765 QuickSync MEF motor with built-in clutch mechanism and temperature sensor allows both manual and motorized control with a simple twist of the motor housing.

Designed especially for the Takahashi MEF Dual-Speed focusers, the QuickSync MEF features simple installation and an elegant design. The QuickSync motors are fully compatibility with the FocusLynx Control Hub making QuickSync the very best choice for motorizing any Takahashi telescope with the dual-speed MEF (Micro-Edge Focuser).

This version requires the external Optec FocusLynx controller. If you would prefer the fully integrated solution consider the ThirdLynx model (OP-19965)

Older Takahashi rack-and-pinion focusers may have an original MEF with two silver knobs rather than a black fine-focus knob. The black knob MEF has a 7:1 reduction and is manufactured in Japan by Takahashi, while the early silver version was made in the U.S. and features a 10:1 reduction. If your focuser is the U.S. version with silver knobs, be sure to specify the #19765-US item (below).

U.S. Version? (Required)
Recommended Add-ons and Accessories
Product Price Quantity
OP-19690 - Optec FocusLynx Dual-Focus Control Hub
OP-19690 - Optec FocusLynx Dual-Focus Control Hub
About This Product

Optec's FocusLynx Controller is capable of operating two focusers simultaneously and has full ASCOM compliance.

$350.00 each
OP-19691 - Optec Universal Mounting Bracket for Focus Lynx Control Hub
OP-19691 - Optec Universal Mounting Bracket for Focus Lynx Control Hub
About This Product

The Optec Universal Mounting Bracket screws directly to the back of the FocusLynx Control Hub back and allows easy attachment to most any mount. 

  • Material:  6061 aluminum, anodized black
  • Length:  4.9" (124mm)
  • Width:  4.7" (120mm)
  • Thickness: 0.1" (2.5mm)
  • Weight: 1.8 oz (50 g)
  • Mounting Holes:  Clearance for 1/4-20
  • Connection to FocusLynx:  Four 4-40 flathead screws (included)
$55.00 each
OP-19695 - Optec FocusLynx Hand Control with Fine Focus and Digital Read Out
OP-19695 - Optec FocusLynx Hand Control with Fine Focus and Digital Read Out
About This Product

The Focus Lynx Hand Control provides an easy, vibration-free method of focusing the telescope when using the FocusLynx Control Hub. Featuring IN and OUT buttons, a 2-line display, and Quick Sync synchronization capability. The FocusLynx Hand Control is a "must-have" option for any system where the operator may be at the telescope.

It includes an electronic Fine Focus Knob for greater control and tactile feedback while using eyepieces at the telescope. An embedded rotary encoder switch allows one-hand fine focus control while using an eyepiece. No need to move your eye away from the eyepiece - with this improvement the FocusLynx hand control provides simple, intuitive and precise control of the focus motor. The FocusLynx Hand Control plugs into the Hand Controller port on the bottom of the FocusLynx Control Hub using the included telephone handset cord.

$145.00 each
QTY:  
Price as Configured: $325.00

Product Help
Need help deciding?
Tell us what you're looking for, and we’ll point you in the right direction. .
Instructions Download
Instructions
Open
Download