10Micron AZ1000HPS Alt-Azimuth Mount

About This Product

The Half Pillar is an important accessory that can offer more clearance between the tripod and the optics in order to avoid the risk of collision, especially with long optical tubes. The usable height of this special half pillar is 130mm (5in.) It is designed to offer great rigidity but with a reasonable weight and is CNC milled from a solid block of aluminum with an anodized black matte finish.

About This Product

Designed for the GM1000 HPS Mount and the Leonardo Binomount, the Aries Tripod is the world´s most rigid and most lightweight collapsible tripod. With a folding dual-tube upper leg design, to provide maximum rigidity, it has been tested to sustain the HPS-encoder accuracy of the 10Micron HPS mounts. It is a state of the art tripod and the best solution for your GM1000 HPS mount.

About This Product

This 6.6 lbs. (3 kg) counterweight is exclusively designed for GM1000HPS, AZ1000HPS, and BM1000 Leonardo mounts. A precise 30mm hole offers a smooth movement on the shaft, and facilitates the balancing operations and the stainless steel guarantees no corrosion. The ergonomic screw ensures safe tightening.

About This Product

This 13.2 lbs. (6 kg) counterweight is exclusively designed for GM1000HPS, AZ1000HPS, and BM1000 Leonardo mounts. A precise 30mm hole offers a smooth movement on the shaft, and facilitates the balancing operations and the stainless steel guarantees no corrosion. The ergonomic screw ensures safe tightening.

About This Product

This accessory allows to accommodate the 10Micron electronic control box on round metal pier. Made of fine machined black anodized aluminum.

About This Product

Custom made by Geoptik for 10Micron for the GM1000 and BM100L mounts, this is a fine wooden tripod, with a finely CNC machined and anodized aluminum base. The legs are made of “first choice” beech wood”, treated for outdoor use. This material guarantee excellent stability and vibration damping, also in case of heavy loads. The height of the tripod can range from 950 mm to 1100 mm (37.4” to 43.3 “) through extendable anodized aluminum extensions. The extension’s tips are reversible, offering the possibility of a round rubber or a sharp metal tip. The triangle-shaped accessory tray, made in laminated beech, offers several holes to accommodate 31.8 and 50.8mm eyepieces. 10Micron upholstered Cordura transport-bag. The tripod weighs 12 kg (26.4 lbs.).

About This Product

Set of two special resin cases made specifically for GM1000HPS mounts; a trolley style case accommodates the mount and a hand case accommodates the counterweights and the electronic parts.

About This Product

Two reinforced cordura bags with handles for the GM1000HPS mount and accessories. The larger bag is designed to recycle the shaped padding included in the transport cardboard box that the mount ships in. The other bag is for electronics and accessories. This is a inexpensive system to transport the mount and its accessories when you travel to your preferred observation site.

About This Product

This adapter flange allows you to connect the GM1000 mount to standard flat-top round pier.

About This Product

This adapter allows to connect the GM1000 HPS mount to Centaurus II tripod, for an ultra-stable configuration.

About This Product

Optional mount base adapter kit (knobs + screws + azimuth pin) to assemble the GM1000 mount directly on a fixed pier without the adapter (#10M1090). It’s already supplied with the GM1000 HPS Mount.

About This Product

This adapter is required in order to accommodate the Lodual plate (#10M2105) on the 1000HPS mounts. The #10M2085 (Losmandy dovetail clamping plate 3″) is included in the kit. This kit ensures the correct orientation of the optical tubes in order to comply with the HPS fixed home position requirements.

About This Product

300 mm length dovetail bar, Losmandy style (3”), made of black an3odized aluminum; it can be used directly on the GM1000 Mount.

About This Product

400 mm length dovetail bar, Losmandy style (3”), made of black anodized aluminum; it can be used directly on the GM1000 mount or on the other mounts with suitable adapters.

About This Product

500 mm length dovetail bar, Losmandy style (3”), made of black anodized aluminum; it can be used directly on the GM1000 mount or on the other mounts with a suitable adapter.

About This Product

This Power Supply is a very high quality and reliable 12V to 24V DC converter. It ensures that, from a 12V DC power source, the proper 24V, 5A (120W) output power is supplied to the GM1000 and GM2000 mounts. The input power cable is provided with a standard car lighter plug. It is perfect for “field” observations using a suitable 12V battery (not supplied).

About This Product

This Switching Power Supply is a very high quality device; it accepts 110 to 240V AC input; the output ensures the proper 24V, 5A (96W) power supply to the GM1000 mounts.